5 Rossmoyne Road

Colac, 3250

65 Caramut Road

Warrnmabool, 3280

914 La Trobe Street

Ballarat, 3350

CLAAS Harvest Centre logo

plough
Deep tillage

Designed for ripping compact ground prior to cultivation and for aerating pastures with minimal disturbance to the surface.

  • Heavy duty 100 x 100 x 9mm tine mounting frame.
  • High tensile cast shank assembly with 24” (610mm) underframe clearance with 1” shear pin protection. Replaceable points and shin guards – also available with tungsten tips.
  • Breakout force approximately 4000 ft.lbs.
  • Tine spacing set at 12” (300mm).
  • Approximately 15HP required per tine.
  • Adjustable pair of Holden wheels for depth control available as an option.
  • Optional coulters available to reduce surface distur-bance in pasture.

POST HOLE DIGGERS

Compact, standard and heavy duty models to suit all tractors.

  • High quality European gearbox and drive shaft
  • Digs to a maximum of 4'
  • Augur sizes 4"-24"
  • Replacable teeth and pilot
  • Jib hook and transport chain as standard
  • 12 month warranty

FORKS

Tapered high tensile tines are designed to penetrate silage bales easily.

  • European tines manufactured to the highest quality standards
  • Straight conus II tines with coned nut
  • Category 1 linkage with category 2 bushes
  • 12 month warranty

SLASHER

Built for rugged Australian conditions using top quality components. Horsepower requirements of 40-100HP. Available in 5′ (1.5m) to 6’6″ (2.0m) sizes.

  • One piece body made from 6mm quality steel. Excellent underframe clearance clears cut material quickly.
  • Bondioli & Pavesi Series 5 pto driveshaft with 2 plate slip clutch protects slasher and tractor.
  • 75 HP oil lubricated gearbox. Optional Italian manufactured gearbox upgrade. Excellent seal guards make it virtually impossible for wire to damage the gearbox.
  • Available in 3 widths fitted with both centre and offset mounting in HD153 and HD180 models.
  • Floating headstock for working on undulating ground.
  • Optional solid rubber wheelkits and rollers available for depth control.
  • Standard with front and rear chain guards

GRADER BLADE

By incorporating the versatility of an hydraulic grader blade into the popular medium duty model, Berends have provided an implement for small to mid range tractors which is easy to use but with the strength and reliability to match Australian conditions.

  • Hydraulic angle allows mouldboard to be angled at up to 45 degrees in each direction from the tractor seat
  • Can be manually offset in seconds
  • Tilt position can be controlled by ratchet or optional hydraulics
  • Diverter kits available to be used on tractors with a singleset of remotes
  • Heavy duty hardened reversible cutting edges
  • Optional pneumatic wheel kit for depth control

GRADER BLADE WITH RIPPERs

Grader blades designed and developed over many years to provide the user with a most versatile implement at a reasonable cost.

  • Fitted with positive quick release for angle selection
  • Can be manually offset in seconds
  • Alternative holes forlower linkage arms
  • 6' medium duty model available with ratchet tilt or hydraulics
  • Heavy duty revesible cutting edges
  • Optional pneumatic wheelkit available for depth control

MULCHERS

Versatile heavy duty mulching mowers designed and manufactured for clean, fast mowing and mulching. It’s low body design makes it suitable for orchard and vineyard applications, however it also has the capabilities to cut heavier scrub.

  • Constructed from a thick high tensile rotor tube, there is the option of either hardened steel Y blades or cast iron T hammers (flails).
  • Belt drives lessen the shock loads which mulchers have to endure.
  • Suitable for a large range of surfaces including sports and school grounds, golf courses, vineyards, orchards, general pasture and road-side contacting.
  • Consisting of either 3 or 4 belts, depending on size, they are fitted using taper lock pullies for ease of maintenance
  • Adjustable back flap doubles as a scraper for the roller when in the mulching position.
  • Heavy duty 85HP Italian Oil Bath GearboxSeries 7 Italian Driveshaft with optional over-run clutch

OFFSET DISCS

Heavy Duty trailing offset disc plough for medium horse power tractors.

  • Ideal for primary and secondary tillage using 40-90hp tractors
  • Twin pressure screws each side can be adjusted individually
  • Triple sealed bearings
  • Fitted with 560mm to 5mm scalloped discs
  • Standard prong scrapers
  • Fully adjustable drawbar

CHISEL PLOUGH

The ideal tool for primary cultivation. The spring action of the tines and chisel points have been proven to penetrate where many other machines find conditions too hard.

  • Available in 5, 7, 9 and 11 tine sizes with 12" adjustable spacings
  • Approx 8-10hp per tine required
  • Adjustable spring designed to give longer, more progressive action chiselling as the machine moves along the ground

Need help? Call our customer service team on (03) 5231 6322

Swayn & McCabe Logo
CLAAS Harvest Centre logo

HARVEST SUPPORT
At CLAAS Harvest Centre, our workshop and parts teams deliver around-the-clock harvest support to keep your farm machinery operating at peak efficiency during your busiest times of the year.

COLAC
5 Rossmoyne Road, Colac, 3250
Ph: 03 5231 6322

WARRNAMBOOL
65 Caramut Road, Warrnambool, 3380
Ph: 03 5561 1733

BALLARAT
914 LaTrobe Street, Delacombe, 3350
Ph: 03 5332 0177

Want to contact us via email?

Subscribe to our newsletter

Be the first to hear about our specials, new products and other CLAAS Harvest Centre Swayn & McCabe news.