Perard has designed two families of travelling platforms: X-Flow and Interbenne.
X-Flows are travelling platforms equipped with a large transfer screw to optimise harvesting operations while limiting compaction. They are available in two ranges, single-axle or double-axle, with 4 models, from 15 to 34 m³.
Interbenne travelling platforms offer a high work output, with superior versatility and practicality (fertilisers, seeds, etc.). Fitted with tandem or tridem, with capacities from 27 to 46 m³.
X-Flow 15 and 19
The X-Flow 15 and 19 models are designed to accept the total capacity of the hopper on the largest combine harvesters that can then be immediately transferred. They are easy to use, have limited weight and are cheap to operate, which makes them essential tools for all optimized harvesting operations. They enable combine harvester productivity to be maximised by transferring on the move, while limiting compaction.
The X-Flow 15 and 19 models are 3 m wide, which makes these machines very stable. With the Ø500-mm transfer screw, it is a very powerful machine. The large-diameter tyres provide a generous contact area with the ground and low rolling resistance.
X-Flow 28 and 34
The X-Flow is a purely crop-oriented travelling platform. Its 600-mm screw for 28 and 34 m³ makes it one of the most efficient machines on the market for these capacities. It can fill lorries or large trailers at the ends of fields while following as much as two large combine harvesters.
It improves performance by more than 25% (up to 40% for maize).
Its 3.50-m width means it does not have to follow in the tractor’s tracks. Therefore, the X-Flow is the essential tool for all large harvesting operations, even in extreme conditions. Its tandem axle limits ground compaction.
The Interbenne is designed to optimize harvesting while limiting compaction. Its high output means a time saving of more than 25% by eliminating emptying when stationary.
The Interbenne is also incredibly versatile throughout the entire year. Its road width and multi-position transfer screw means it can run on the road when loaded and be emptied into a pit or silo.
The variable height and large offset of its transfer screw enables it to fill seeders and fertiliser spreaders.
The Interbenne 38’s large capacity means it can fill a semi-trailer very quickly.
The Interbenne 46 is equipped with a 700mm plunger auger and 600mm swivel part making it possible to obtain a record-breaking discharge rate of approximately 1 minute for 46m³ without any risk of compressing and therefore breaking the grain.
Hence, the Interbenne 46 can follow several combine harvesters, even with very large maize outputs.
With a road width and multi-position variable height screws, it is incredibly versatile for emptying into a pit, filling with fertiliser or seed.